October 19, 2009
Generac Guardian Series 5501 8,000 Watt Air-Cooled Propane/Natural Gas Powered Home Automatic Standby Generator with Steel Enclosure

Product Description
8/7KW Air-Cooled Stand By Generator, Powers 8 Circuits Of Your Home Or Business Such As: Furnace, Water Heater, Kitchen, Including Refrigerator, Bathroom, Bedroom, Sump Pump, Family Room, True Power Technology Provides Safe Operation Of Sensitive Electronic Equipment & Appliances, Meets Ieee/Utility Standards, Easiest Installation With The Pre-Wired, Pre-Packaged 100A, Nema 1, Indoor Rated Only, Automatic Transfer Switch, OHVI Industrial Engine Designed Specifically… More >>
Generac Guardian Series 5501 8,000 Watt Air-Cooled Propane/Natural Gas Powered Home Automatic Standby Generator with Steel Enclosure
Filed under Vertical Wind Generator by on Oct 19th, 2009. Comment.
Leave a Comment


Comments on Generac Guardian Series 5501 8,000 Watt Air-Cooled Propane/Natural Gas Powered Home Automatic Standby Generator with Steel Enclosure
I do have the previous model, what is the same thing but a different “box” I did have it 2 day before Katrina and here in Hollywood we did have-it Purdy good. Well of course I did not have a perfect installation but everything got hock-up in less the 8 hours. This kit is perfect. The automatic switch box makes the generator kick-in in 30 seconds from a power outage, and switch back-in by itself. I did select this unit because I have an AC who draw 13 amps a 230 1 ph. and all the light, PCs, Tv and small thing draw no more than 2 Amps a 115v. No hot water or oven. And I can’t have the cafe going with the toaster Oh well I can have-it all because I’m cheap…
I didn’t want to be independent from the gas company, and then I did install a liquid propane system. When Wilma past-by I did run the unit almost 24 hrs a day and I did consume about 75 to 100# of LP a day what is expensive but cheaper then gas and you can store-it for a long theme. Also Propane can be find faster than gas, because gas station need electricity…
For the noise level, I didn’t have any complaints from Nabors or if I’m in one room away I can barely hear-it. The control is very simple. Spot the breaker you want to be cover, disconnect-it and connect the wires to the new circuit. It’s that easy.
The only thing you will need is a battery, oil, a base to install it, gas line (1″ pipe minimum) and regulator. The unit is complete by itself, easy to install, be careful it’s 800#, a bit heavy for one guy… Read the book it’s short and simple, the set-up takes a minute, the governor is a bit tutchy to adjust especially when there a full load starts. For the maintenance, I change the oil, oil filter and the air filter one a year keep an eye on the gas and that-it. Notice the unit cover is painted with a good quality cook enamels, I have it expose to the sun and rain, after 3 years it look like new still.
To be on a safe side have an electrician doing the electric system and the gas Co. to do the line work. And for not a arm and a leg you will be sleeping with peace and comfort.
PS Sorry for my french, I’m a handy man more then a writer…
Rating: 5 / 5